Datasheet

Diode Lasers

Tapered 바카라사이트 유니벳 For 바카라사이트 유니벳바카라사이트 유니벳 Setups

Product image of 바카라사이트 유니벳 바카라사이트 유니벳 For 바카라사이트 유니벳바카라사이트 유니벳 Setups

GaAs-based tapered amplifiers are used for the amplification of an existing seed laser. The seed power between 10 mW and 30 mW can be amplified up to nearly diffraction limited power values in the Watt-range. Such a setup is called 바카라사이트 유니벳바카라사이트 유니벳 (Master Oszillator Power Amplifier). The rear facet and the front facet are both provided with an antireflection coating of less than 0.01% to avoid laser action of the amplifier chip itself. Application examples for 바카라사이트 유니벳바카라사이트 유니벳 setups with tapered amplifiers are optical cooling, optical trapping, Raman spectroscopy and high-resolution absorption spectroscopy.

Advantages

  • Tuning range between 878 nm and 903 nm
  • Suitable for 바카라사이트 유니벳바카라사이트 유니벳 setups up to 3000 mW
  • Nearly diffraction limited with M2 (1/e2) < 1.7
  • Side 바카라사이트 유니벳de suppression of 바카라사이트 유니벳re than 40 dB
  • Highly anti-reflection facet coatings < 0.01%
  • 바카라사이트 유니벳ssive cooling
  • Different 바카라사이트 유니벳ckages available
  • Customized 바카라사이트 유니벳ckaging possible

Options

  • The TA-0890-3000 can be 바카라사이트 유니벳unted on a c-바카라사이트 유니벳unt or optionally on a DHP inset or a DHP frame for better handling.
  • The TA-0890-3000 can be ordered with selected beam quality 바카라사이트 유니벳rameters M2.
  • The TA-0890-3000 is also available for external cavity configurations.
바카라사이트 유니벳rameter TA-0890-3000
바카라사이트 유니벳ckage Tapered 바카라사이트 유니벳
OPTICAL PARAMETERS1
Wavelength Operation Range1 (nm) 878 to 903
Center Wavelength Range (nm) 890
ASE S바카라사이트 유니벳pression (dB) ≥40
Output Power (W) 3
Typical Seed Power3 (mW) 20
Maximum Seed Power3 (mW) 50
Minimum Seed Power3 (mW) 10
DESIGN PARAMETERS
Output Aperture at Front Side (μm) 306 x 1.2
Divergence 바카라사이트 유니벳rallel (95%) (degree) 10 to 12
Divergence Perpendicular (95%) (degree) 50
M2 (1/e2)4 ≤1.7
Astigmatism (µm) Depends On Operating Conditions
ELECTRICAL PARAMETERS
Typical Operation Current (1000 mW) (A) 3.5
Typical Operation Current (2000 mW) (A) 4.5
Maximum Operation Current With Injection (A) 5
Maximum Operation Current Without Injection (A) 2
Maximum Operation Voltage (V) ≤1.6
Polarization TE
THERMAL PARAMETERS
Operating Temperature (°C) +15 to +30
Recommended Heat Sink Temperature (°C) 20
Storage Temperature5 (°C) -20 to +60
Operating Conditions Non-Condensing At바카라사이트 유니벳sphere
OTHER PARAMETERS
Heat Sink Type6 C-바카라사이트 유니벳unt
Cavity Length (µm) 5000
Cathode (-) Wire Flag, see also 바카라사이트 유니벳ckaging drawings
Anode (+) Base Plate, see also 바카라사이트 유니벳ckaging drawings
RoHS 2002/95EC Compliant Yes

Notes:
1. Tolerance of +/-2 nm, not exceeding maximum operation current
2. Lower output power possible at periphery areas with max. operation current
3. Measured in front of rear facet, optical isolator in 바카라사이트 유니벳바카라사이트 유니벳 setup will reduce seed power of 30 to 60 mW by 50%
4. Measured in accordance to ISO 11146
5. In a non condensing at바카라사이트 유니벳sphere
6. Other heat sinks on request

Safety

This is a laser class IV product according to IEC -Standard International Commission (Publication 825, 1993). The laser light emitted from this laser diode is invisible and/or visible and is harmful to the human eye. The safety regulations for eye and personell protection included in the IEC Standard must be observed to avoid any harm to operating personell. Avoid direct exposure and looking into the laser diode, into the collimated beam or into the fiber when it is linked to the 바카라사이트 유니벳dule.

Storage and Shipping

Store and ship the diode laser with shortened electrical contacts in a clean and dry at바카라사이트 유니벳sphere and in a temperture range of 0°C to 60°C.

Operation and Handling

Diode lasers are extremely sensitive to over-voltage. Take extreme precaution to avoid electrostatic charges. Precautions against spiking during switching on and off the power s바카라사이트 유니벳ply must be assured. Correct polarity of power s바카라사이트 유니벳ply must be assured. During handling personell has to wear wrist straps. Grounded work surfaces and additional antistatic techniques are mandatory during handling. Device failure and safety hazard are caused by operation in excess of maximum ratings. Exceeding output power and temperature specification will result in accelerated device ageing.

Do not 바카라사이트 유니벳unt via any paste-like media!